This is the Stratasys design for a face shield (without logo), full details can be found at: Stratasys.com however a brief overview has been provided below.
The Visor has been designed to comply with a standard 3-hole punch (4.25” spacing between holes), meaning you can 3-hole punch any clear plastic material and it will fit on the visor. However you will also find a "Shield R2.STEP" file uploaded that provides a drawing if you wish to manufacture a shield. Stratasys is procuring .04" PETG and .02" PC material as shield material.
The fastener for the back of the Visor is a standard #33 rubber-band, however you should be able to use a zip tie, hair tie, suture or other types of string to fasten the backend as needed.
See:
NOTE: Most (smaller) rubber-bands have latex and may not be allowed at care-provider sites.
Full Stratasys Biocompatibility information: https://app.box.com/s/r5w51n1ctm8vn88nu8zpww89plyo0n8l
Bill of Materials:
- 1 : Visor
- 1 : Shield
- 1 : #33 Rubber Band (or other fastener)
Assembly Instructions:
- Attach the shield to the visor by placing the holes on top of the three mounting points on the visor.
- Rotate the visor counter-clockwise or the shield clockwise until the shield is in-place.
- Attach the #33 Rubber Band (or other fastener) to the rear-side of the visor.
- Place the rear of the visor on the back of your head and slide the visor over your head until the front of the visor is on your forehead and the shield covers your face.
The “Files and Instructions for 3D-Printed Face Shields” are provided “AS IS”, in an effort to help with the urgent need for this Item. Users of this Item must determine the appropriateness and use of this Item, whether there are any federal or State regulatory requirements for use of this Item, and for informing other users of these responsibilities. If you use, copy or share this Item, you agree: (1) you will not claim ownership of the logo or name of “Stratasys”, which belongs to the Stratasys; (2) STRATASYS, INC., FOR ITSELF AND ON BEHALF OF ITS AFFILIATES, OFFICERS, DIRECTORS AND EMPLOYEES (STRATASYS), DISCLAIMS ALL WARRANTIES RELATED TO THE ITEM OF ANY KIND, EXPRESS AND IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR USE OR A PARTICULAR PURPOSE; NON-INFRINGEMENT; COMPLIANCE WITH ANY REGULATORY STANDARDS; AND COMPLIANCE WITH ANY OTHER LAWS; and (3) Stratasys retains no and disclaims all liability for any claims of any kind made by person, either as a result of use of or as related to the Item.
