Pre- and Postprocessing Instructions
- Material: PETG is preferred, PLA is acceptable
- Nozzle: 0.4 mm
- Extrusion width/line width (preferred): 0.72 mm
- Extrusion width/line width (alternative): any divisor of 3.5 mm (eg. 0.5 mm, 0.583 mm, 0.7 mm, 0.875 mm)
- Initial layer height: 0.3 mm
- Layer height: 0.3 mm (important for efficient slicing)
- Infill: N/A - Thin enough that it should print solid
- Walls: 3-4 for extrusion width of 0.72 mm; 5 for thinner extrusion width
- Support: No (N/A)