U.S. Department of Health and Human Services — National Institutes of Health

Stackable 3DVerkstan 3D Printed Face Shield Headband Remix

This model has not been assessed for community use or in a clinical setting. Further optimization may be required.

Submitted by:

Fri, 2020-04-24 16:40

I Printed This

Remix It

Vertical Tabs

General Information

Model ID

3DPX-014023

Category

Labware & Devices

Device Use

Safety and Personal Protective Equipment

Keyword(s)

3D Printed Face Shield, 3d printed, Personal Protective Equipment, PPE

This is a remix of the popular and already NIH approved 3DVerkstan face shield headband. What differentiates this model from the original are modifications to make it stackable. These should be printed in PLA with a 0.4mm nozzle, 0.28mm layer height, and no distance.

More information can be found on the designers web site:

https://3dverkstan.se/protective-visor/

You can also find the files and license here:

https://github.com/Cederb/Faceshield.nu/

How to Make

Printer Technology/Material

Polylactic Acid (PLA)

Printer Make/Model

gMax 2 3D Printers

Print Units

18" x 18" x 24"

Attribution

Attribution Instructions

https://3dverkstan.se/protective-visor/

https://github.com/Cederb/Faceshield.nu/

STL/VRML Files

gCreate_Visor_Frame_NORTH_AMERICA_LETTER_v3.stl

5x stacked_gCreate_Visor_Frame_NORTH_AMERICA_LETTER_v3.stl

10x stacked_gCreate_Visor_Frame_NORTH_AMERICA_LETTER_v3.stl

Stackable 3DVerkstan 3D Printed Face Shield Headband Remix.zip

X3D Files

gCreate_Visor_Frame_NORTH_AMERICA_LETTER_v3.x3d

5x stacked_gCreate_Visor_Frame_NORTH_AMERICA_LETTER_v3.x3d

10x stacked_gCreate_Visor_Frame_NORTH_AMERICA_LETTER_v3.x3d

gCreate_Visor_Frame_NORTH_AMERICA_LETTER_v3.x3d

5x stacked_gCreate_Visor_Frame_NORTH_AMERICA_LETTER_v3.x3d

10x stacked_gCreate_Visor_Frame_NORTH_AMERICA_LETTER_v3.x3d

QR Code for https://3dprint.nih.gov/discover/3dpx-014023

Rating

Licensing

Comments

1

Comments

Sat, 2020-05-16 11:32

Print settings in Cura

What print settings work for this in Cura? Speed, cooling, bridging on or off...?