Robagon3D
The following refers to: 3DPX-013409
The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency Guidance for Industry and Food and Drug Administration Staff." This face shield has undergone review in a clinical setting and is recommended when fabricated as instructed.
A prototype face shield that Prusa Research developed. This is a version for the US based on the community feedback, the design was adjusted to fit:
Also included is an optional elastic cover designed to close the gap in the headband, while keeping the entire headband flexible. The purpose of the cover is to further protect your face against the aerosol (e.g. cough) falling from the top.
PETG Recommended for all.
Assembly Manual here: https://manual.prusa3d.com/Guide/How+to+assemble+the+Prusa+Face+Shield+-+RC1-RC2-RC3/1527#_ga=2.131274255.1251442335.1585668708-563513828.1578853173
https://www.prusaprinters.org/prints/27950-prusa-protective-face-shield-rc3-us-version
https://www.prusaprinters.org/prints/27318-prusa-protective-face-shield-cover-rc1-wip
MeganKerr
Fri, 2020-04-10 14:44
Permalink
Hi, is there an ETA to when testing will be completed for this?
America Makes
Mon, 2020-04-13 22:23
Can you please provide update on the delivery of the pdf file of print and assembly instructions? Thanks.
Beth Ripley
Sat, 2020-04-11 13:35
We are just waiting for a PDF of the design print and assembly instructions to be uploaded; we need a hard copy for users, as web links can be unstable and/or disappear.
Comments
MeganKerr
Fri, 2020-04-10 14:44
Permalink
Testing status
Hi, is there an ETA to when testing will be completed for this?
America Makes
Mon, 2020-04-13 22:23
Permalink
Additional information Request
Can you please provide update on the delivery of the pdf file of print and assembly instructions? Thanks.
Beth Ripley
Sat, 2020-04-11 13:35
Permalink
We are just waiting for a PDF
We are just waiting for a PDF of the design print and assembly instructions to be uploaded; we need a hard copy for users, as web links can be unstable and/or disappear.