U.S. Department of Health and Human Services  —  National Institutes of Health

3d Verkstan Remix Independent Arms - Interlocking

This model has not been assessed for community use or in a clinical setting. Further optimization may be required.

Submitted by:
Sun, 2020-04-05 15:35

I Printed This

Remix It

Vertical Tabs

QR Code for https://3dprint.nih.gov/discover/3dpx-013553

Rating

1
Average: 1 (1 vote)

Licensing

Comments

9

View Comments

Comments

Mon, 2020-04-06 10:15

I'm an elementary school teacher working off of a small ForgeFinder. Please break this into 2 files (the center piece and the arms). It will help those of us who need this model because the other face shields are too big for our printing areas. I can cut it into 2 files, but there will be other people in the same boat as me. Thank you!

Mon, 2020-04-06 22:23

Blendered it into pieces for you. Let me know if you have any issues.
https://3dprint.nih.gov/discover/3dpx-013605

Fri, 2020-04-10 17:30

You should be able to split it in the slicer

 

Mon, 2020-04-06 11:06

I can only fit one earpiece, or the center piece, on my Forgefinder. Please break this apart. I don't have the tech or the knowledge to do it. Thank you

Fri, 2020-04-10 17:31

You should be able to split in the slicer

Mon, 2020-04-06 22:25

With this single STL, the footprint is much larger than it needs to be.The author of this file did not take into account that with 3 separate STL's, this print can be fit on a smaller print bed. 
https://3dprint.nih.gov/discover/3dpx-013605 
I blendered it for anyone looking.

Tue, 2020-04-07 10:17

I have uploaded the new file seperated just now.

Tue, 2020-04-07 10:20

I broke this into 3 files and uploaded it so people with smaller printers and make this shield. 

Really like this design because you can fit a lot of them on a CR10S bed. 

Tue, 2020-04-07 11:42

I have uploaded a split file of this redesign.