3d Verkstan Remix Independent Arms - Interlocking

This model has not been assessed for community use or in a clinical setting. Further optimization may be required.

Submitted by:
Sun, 2020-04-05 15:35

Vertical Tabs

QR Code for https://3dprint.nih.gov/discover/3dpx-013553


Average: 1 (1 vote)




I'm an elementary school teacher working off of a small ForgeFinder. Please break this into 2 files (the center piece and the arms). It will help those of us who need this model because the other face shields are too big for our printing areas. I can cut it into 2 files, but there will be other people in the same boat as me. Thank you!

Blendered it into pieces for you. Let me know if you have any issues.

You should be able to split it in the slicer


I can only fit one earpiece, or the center piece, on my Forgefinder. Please break this apart. I don't have the tech or the knowledge to do it. Thank you

You should be able to split in the slicer

With this single STL, the footprint is much larger than it needs to be.The author of this file did not take into account that with 3 separate STL's, this print can be fit on a smaller print bed. 
I blendered it for anyone looking.

I have uploaded the new file seperated just now.

I broke this into 3 files and uploaded it so people with smaller printers and make this shield. 

Really like this design because you can fit a lot of them on a CR10S bed. 

I have uploaded a split file of this redesign.