ZippyShield: Single Print Adjustable Face Shield

This model has not been assessed for community use or in a clinical setting. Further optimization may be required.

Submitted by:

Matthew Fiedler

Fri, 2020-04-03 21:24

Vertical Tabs

General Information

Model ID

3DPX-013504

Category

Labware & Devices

Device Use

Safety and Personal Protective Equipment

Keyword(s)

Quick Fabrication Adjustable ZippyShield Face Shield PPE

Designed by re:3D, this improved PPE Face Shield is approved by Infectious Disease at Texas Children's Hospital. Provides closed brim to protect from droplets entering above the forehead. One-piece 3D printed design reduces need for extra materials in short supply and is more readibly sterilizable for re-usability. Fully adjustable head band. Utilizes standard medical grade PETG lens giving 180 degree protection.

Head band can be printed from PETG or DOW Olefin Block Copolymer (OBC).

***REV 11 ***

Added a tab to make it easier to open the latch to loosen the headband.

Rev 11 includes two variations of the design: one for fitting with a PETG lens from Professional Plastics, and one for fitting a lens with holes punched from a US standard 3 hole punch (7mm holes, 108mm apart).

How to Make

Printer Technology/Material

Material Extrusion

Printer Make/Model

Any FDM/PJP/FFF Printer

Print Units

Printer-specific Build Instructions

Build file

ZippyShield Headband Rev10.3MF

Specific material

PETG

Number of prints per build

Build time

1hr

Pre- and Postprocessing Instructions

For fast production, design has been optimized for 0.4mm nozzle and 0.5mm extrusion width and 0.3175mm layer height. Three solid top and two solid bottom layers with two perimeters. 0% infill. Sucessfully printed 6 per bed with PETG on re:3D Gigabot with a nozzle temperature of 245C and bed temperature of 65C. Default speed was at 75mm/s with a first layer speed of 65% to reduce print time.

Attribution

Attribution Instructions

ZippyShield is a product of re:3D, Inc. https://re3d.org/

Documentation

Supplemental Documentation

PETG Lens Material Properties

Lens SDS

ZippyShield Lens Inspection

ZippyShield Headband Inspection

Rating

Licensing

Comments

2

Comments

Samantha Snabes

Mon, 2020-04-06 22:16

Permalink

5 Star Vote:)

Accidently gave this design one star while learning how to vote, but I have observed postive feedback from clinicians using this design and would have given it 5!

vargas92

Mon, 2020-04-06 13:48

Permalink

ZippyShield: Single Print Adjustable Face Shield

This model has not been assessed for community use or in a clinical setting. Further optimization may be required.

I Printed This

Remix It

Vertical Tabs

STL/VRML Files

X3D Files

Other Files

Rating

Licensing

Comments

2

Comments

5 Star Vote:)

Love this!