20200407 - 3DPX-013410 PLA 0.2mm 100%

Lot of 6 @ 100% scale.

Printer Info:

  • 0.4mm brass nozzle
  • Single extruder
  • 225mm x 245mm x 210mm (xyz)
  • RAMPS 1.4 system

Print Settings:

  • CURA 4.4 to slice and manage
  • 0.2mm layer height
    • used Cura's experimental "Adaptive Layers" setting
  • 0.4mm line width @ 0.8mm wall tickness
  • Borosilicate bed at 60C initial layer, then to 50C
  • PLA extrusion temp set to 205C
  • Print initial set of 6 at 100% model size @ 2h30m
  • Print second set of 10 at 85% model size @ 2h10m
Category 
Printer Technology/Material 
Resolution (Layer Height) 
0.2mm

Click to Enlarge - 1 image(s)

Lot of 6 @ 100% scale.
Rating 
1
Average: 1 (1 vote)