I completed the modeling in 1.25 hours.
We aim to create 10 pieces a day.
The shaped objects are donated to the hospital.
The recipe for modeling is as follows.
Printer: Creator Pro (FlashForge)
resin: PLA
Conversion software: FlashPrint (FlashForge)
Software settings
Resolution: Low (faster)
Layer height
--- Layer height: 0.30 mm
--- First layer: 0.30 mm
Outer frame
--- Number of outer layer: 2
--- Head layer number: 6
--- Number of bottom layers: 6
Filling rate
--- filling rate: 30%
--- Model internal filling pattern: hexagon
--- Combine combine: disabled
Speed
--- Printing speed: 60 mm/s
--- Head movement speed: 100 mm/s
Temperature
--- Left head: 210°C
--- Platform: 55°C
Other
--- Cooling fan control Set the starting height
--- Height to start the fan: 1.00mm
Comments
NES
Fri, 2020-07-17 21:16
Permalink
Modeling completed in 1.25 hours
I completed the modeling in 1.25 hours.
We aim to create 10 pieces a day.
The shaped objects are donated to the hospital.
The recipe for modeling is as follows.
Printer: Creator Pro (FlashForge)
resin: PLA
Conversion software: FlashPrint (FlashForge)
Software settings
Resolution: Low (faster)
Layer height
--- Layer height: 0.30 mm
--- First layer: 0.30 mm
Outer frame
--- Number of outer layer: 2
--- Head layer number: 6
--- Number of bottom layers: 6
Filling rate
--- filling rate: 30%
--- Model internal filling pattern: hexagon
--- Combine combine: disabled
Speed
--- Printing speed: 60 mm/s
--- Head movement speed: 100 mm/s
Temperature
--- Left head: 210°C
--- Platform: 55°C
Other
--- Cooling fan control Set the starting height
--- Height to start the fan: 1.00mm