DtM-v3.1 Prints on Ultimaker S5

Ultimaker S5, AA 0.4, Draft 70mm/sec, 30% Infill, 7hrs 31min for three parts (2.5 hrs / band).

To fit three parts on print bed, disable build-plate adhsion (no brim). This will give you maximum area. All hand bands were rotated 15 degrees, and then positioned to avoid interfering with one another.

Category 
Printer Technology/Material 
Printer Make/Model 
Resolution (Layer Height) 
0.4

Click to Enlarge - 1 image(s)

Rating 
5
Average: 5 (2 votes)

Comments

Ultimaker S5, AA 0.4, Draft 70mm/sec, 30% Infill, 7hrs 31min for three parts (2.5 hrs / band).